Heating

Nectre Wonderfire

Speak to an expert about this product

Enter your details and one of our expert staff will contact you at your preferred time to discuss your requirements.

Name

Telephone

Email

State

Preferred contact time



How can we help?

Description

Wonderfire Gas Log Fire

The Heart of the Heat

We all enjoy the sight of a living, dancing fire, set in a traditional mantel fireplace. But there is the wood to chop, the fire to set and ash to clean. Unless of course you install a Wonderfire. A Wonderfire looks so real you could be forgiven for believing the coals or wood logs are real. In fact they are made of ceramics that not only look realistic but reach their maximum temperature in a matter of minutes. At its heart is a sophisticated ceramic venturi burner that proportions and premixes the gas to ensure complete combustion. At 1200C it gives a real fire glow at the base of the coals or logs. The gases then pass through secondary slots, are mixed with more air and then burnt again to produce clean flames that dance and shimmer like a real log fire.

It's a system that no other gas fire can match for warmth and effect.

Warmth at the push of a button

The Wonderfire offers the convenience of an electronic ignition system that incorporates a pilot light for ease of operation or you might also choose our optional remote control. Safety is also an important feature of the Wonderfire. A flame failure device automatically turns the gas off in the event of the fire going out.

Wonderfire fan forced performance

Designed to maximise the heat produced by the burner, the Wonderfire fan forced box incorporates a unique heat exchanger at the top of its firebox. The hot exhaust gases heat the air in the heat exchanger and transfers this warm air back into your room with the assistance of a fan. The Wonderfire Fan Forced Box can be installed into an existing chimney using one of our existing Edwardian or Victorian cast iron fascias or can be adapted by your Wonderfire Dealer into a new installation using the ‘Easy-fit’ version where no masonry is required.

Fits an existing fireplace, wonderfully

Walk into a room with an open fireplace, complete with mantel and decorative surrounds and you are immediately drawn to it. It is a feature that always becomes the focal point of a home. But not everyone wants the odour or inconvenience of a wood fire. Wonderfire is the answer! The simplest way to rejuvenate and existing fireplace, turning it into a smokeless open gas fire, is to install the Wonderfire. Fit the Wonderfire using a new freestanding grate or your existing grate can be adapted. You can dress up your new Wonderfire by installing it in one of our standard Edwardian or Victorian decorative castings. Now available with electronic ignition and optional remote control or a manual unit with piezo ignition.

Turn a blank space into an elegant fireplace.

Wonderfire Easyfit.

How do you achieve the warmth and character of a real fire where no chimney or fireplace exists? It’s easy with Wonderfire Easyfit. So easy you can do it yourself. See adjacent drawing. The Easyfit system comes pre-assembled including the cast iron surround of your choice (Edwardian or Victorian),zero-clearance fan box with gather, manual or electronic Wonderfire burner in log or coal.
Add a traditional timber mantelpiece and what was once a blank space becomes the elegant focal point of your room. The Wonderfire Easyfit can be placed directly onto a wooden floor, connected to gas and a single skin flue that extends 600mm above the roof. You can fabricate a chimney breast around the unit yourself or have your sales consultant organise this for you.

Wonderfire

The simplest way to make your existing fireplace into and open gas fire, it can be placed into existing fireplaces using a new free standing grate or perhaps your existing grate can be adapted. Optional remote control available. Also available with a manual valve and piezo ignition.

Specifications: Natural Gas only. AF180F 35 MJ

Wonderfire Fan Forced Box

The fan forced box, is an accessory for the Wonderfire model AF180F. It incorporates a unique heat exchange situated at the top of the box and a 3speed fan to circulate heated air around your room. The fan forced box can be fitted into an existing chimney using a standard cast iron fascia.

Specifications: Electrical Connection. 240V, standard 3pin 10amp plug, 3 speed fan. Will heat 120 cubic metres of average insulated house using the AF180F.

Wonderfire Zero Clearance Fan Forced Box

Even if you do not have a chimney, you can use the zero clearance fan box with your own cast fascia or use an “Easy-fit” system which incorporates the zero clearance fan box with either our Edwardian Tiled Fascia or our Victorian Arched Fascia, already fitted together to save you time, hence the name “Easy-fit”.


Specifications

Features

Options

  • Decorative gas coal / log fire
  • Primarily designed to be installed into a fan box
  • Burner into an existing grate
  • The fan box is compatible with most 18" Victorian / Edwardian fire-grates
  • Natural gas only
  • Consumption: 35 MJ
  • Gas connection: 1/2" BSP
  • Electrical Connection: 240V 3 pin 10Amp plug
  • Heating capacity: 120m3when installed in a fan box (3 speed fan)

Easyfit Options:

  • Pre-assembled zero clearance fan box with gather
  • Fascia of your choice (Edwardian/Victorian)
  • Burner of your choice (electronic or manual)
  • Choice of log or coal effect
  • Tile slides included with Edwardian fascia
Specifications: Electrical connection. 240V, standard 3pin 10 amp plug. 3 speed fan. Will heat 120 cubic metres of average insulated house using the AF180F.

Downloads