FASCIA KIT for Plaster/Stud Wall
FASCIA KIT for Masonry Wall
Where installation is through a combustible wall ie., Plaster, Timber etc., a 175mm(7") Triple Sheilded Flue Kit must be used.
The Eureka Gemini "Through Wall" dual room heater has been designed to be installed into a combustible (plaster) interior wall (100mm to 110mm thickness). In one room you have a freestanding heater and in the other room you have an insert.
Two one piece flat glass doors.
Strong 6mm thick firebox.
Two quiet and powerful three-speed fans designed for greater air movement.
Pre-heated primary air.
Firebrick lined on both sides to retain heat.
8mm Baffle Plate.
Complies to Standards AS/NZS 4012/4013/4014.1:1999
Imagine this...An insert fireplace look in one room and a freestanding model in the family or games room
All this from one wood heater!
HEIGHT WIDTH DEPTH WEIGHT CAPACITY
Woodheater 700mm 680mm 820mm 218kg Up to 28 sq
Through wall fascia* 920mm 969mm (wall thickness - Combustible 100-110mm, Masonry min. 468 - max. 748mm)
* Hole size to be cut for fascia 945mm W x 900mm from hearth
Clearances and Hearths
HEARTH TYPE MIN HEARTH SIZE CLEARANCE FROM SIDE WALL
Width x Depth x Thickness
Full - No air gap 969mm x 1750mm x 6mm 350mm
(500mm in front of heater base)